Climbing Merit Badge
Requirements for the Climbing merit badge:
- Do the following:
- Explain to your counselor the most likely hazards you may encounter while participating in climbing and rappelling activities and what you should do to anticipate, help prevent, mitigate, and respond to these hazards.
- Show that you know first aid for and how to prevent injuries or illnesses that could occur during climbing activities, including heat and cold reactions, dehydration, stopped breathing, sprains, abrasions, fractures, rope burns, blisters, snakebite, and insect bites or stings.
- Identify the conditions that must exist before performing CPR on a person.
- Learn the Leave No Trace principles and Outdoor Code, and explain what they mean.
- Present yourself properly dressed for belaying, climbing, and rappelling (i.e., appropriate clothing, footwear, and a helmet; rappellers and can also wear gloves).
- Location. Do the following:
- Explain how the difficulty of climbs is classified, and apply classifications to the rock faces or walls where you will demonstrate your climbing skills.
- Explain the following: top-rope climbing, lead climbing, and bouldering.
- Evaluate the safety of a particular climbing area. Consider weather, visibility, the condition of the climbing surface, and any other environmental hazards.
- Determine how to summon aid to the climbing area in case of an emergency.
- Verbal signals. Explain the importance of using verbal signals during every climb and rappel, and while bouldering. With the help of the merit badge counselor or another Scout, demonstrate the verbal signals used by each of the following:
- Boulderers and their spotters
- Rope. Do the following:
- Describe the kinds of rope acceptable for use in climbing and rappelling.
- Show how to examine a rope for signs of wear or damage.
- Discuss ways to prevent a rope from being damaged.
- Explain when and how a rope should be retired.
- Properly coil a rope.
- Knots. Demonstrate the ability to tie each of the following knots. Give at least one example of how each knot is used in belaying, climbing, or rappelling.
- Figure eight on a bight
- Figure eight follow-through
- Water knot
- Double fisherman's knot (Grapevine knot)
- Harnesses. Correctly put on a commercially made climbing harness.
- Belaying. Do the following:
- Explain the importance of belaying climbers and rappellers and when it is necessary.
- Belay three different climbers ascending a rock face or climbing wall.
- Belay three different rappellers descending a rock face or climbing wall using a top rope.
- Show the correct way to tie into a belay rope.
- Climb at least three different routes on a rock face or climbing wall, demonstrating good technique and using verbal signals with belayer.
- Using a carabiner and a rappel device, secure your climbing harness to a rappel rope.
- Tie in to a belay rope set up to protect rappellers.
- Rappel down three different rock faces or three rappel routes on a climbing wall. Use verbal signals to communicate with a belayer, and demonstrate good rappelling technique.
- Demonstrate ways to store rope, hardware, and other gear used for climbing, rappelling, and belaying.
Feb 24, 2015 - Bob
Is there any age/rank requirement for this badge?Feb 24, 2015 - Scouter Paul
@Bob - All the requirements are listed above. There is no mention of age or rank, as is true for all merit badges.Jul 23, 2016 - LJ
There is an age requirement, but it depends of where you go. In my area, you must be thirteen to rappel, but can be any age to climb.
Contest - Ask a Question - Add Content
This site is not officially associated with the Boy Scouts of America
Find more Scouting Resources at www.BoyScoutTrail.com
Follow Me, Scouts
Gale Stanford on Boy Scout Uniform
David Johnson on Boom Chicka Boom song
robin baum on Charlie MTA song
ahmed abbassi on Fitness Challenge activity
Rebecca on Mine Hand song
Scouter Paul on Social Distancing MB
Megan Smith on Social Distancing MB
Holly Lettau on One Bright Morning skit
Nrsbologna on Gopher Guts song
Scouter Paul on Bird Study MBMore Comments...